4.5" – 8"
Agricultural Borewells
4.5" to 8" bores for farmland, drilled to sustainable aquifer depth with yield testing before handover.
What we do
Every stage of a borewell, handled by one crew.
From the survey peg to a running pump — agricultural, domestic, society, industrial and municipal drilling, plus revival of low-yield bores.
What we do
Drilling services, end to end.
Low noise
Domestic & Society Bores
Compact-footprint drilling for homes, apartments and gated colonies with minimal disruption and clean site restoration.
Pre-drill
Hydro-Geological Survey
Resistivity and water-diviner survey to locate the strongest fracture zone before we commit the rig.
Revival
Borewell Flushing & Repair
Reviving low-yield or collapsed bores with compressed-air flushing, re-casing and depth extension.
Turnkey
Submersible Pump Setup
Pump selection, cabling, panel wiring and commissioning matched to your bore's actual discharge.
Up to 1200 ft
Industrial & Municipal
High-capacity deep bores for factories, schools and public works, with documentation for approvals.
Rig specifications
Numbers before promises.
- Bore diameters
- 4.5", 5", 6.5", 8"
- Typical depth range
- 200 ft – 1200 ft
- Drilling method
- Truck-mounted DTH hammer
- Compressor capacity
- 450 – 1100 CFM
- Casing
- ISI-grade PVC / MS pipe
- Mobilisation
- Same district, usually 24–48 hrs
What every quote includes
- Site visit and fracture-zone survey
- Rig mobilisation and levelling
- Drilling with continuous cutting logs
- Casing lowering and grouting
- Air-flush yield test on completion
- Pump sizing advice and installation
How we work
Six steps, no surprises.
A clear workflow from first survey to final handover — so you know exactly where your project stands.
- 01
Step 1
Site visit & survey
We walk the land, study the terrain and run a resistivity check to mark the strongest point.
- 02
Step 2
Written quotation
Per-foot rate, casing spec, expected depth and timeline — confirmed before anything moves.
- 03
Step 3
Rig mobilisation
Truck-mounted rig and compressor reach your site, get levelled and barricaded the same day.
- 04
Step 4
Drilling & casing
DTH drilling through soil and hard rock, with ISI casing lowered as the bore advances.
- 05
Step 5
Yield test & flushing
Air flushing until the discharge runs clear, then a measured yield reading you can see.
- 06
Step 6
Handover & pump
Bore capped, site cleaned, and submersible pump installed and commissioned if required.
Tell us the site, we'll quote the foot rate.
Survey, drilling, casing and pump — one accountable team, one quoted price.